|
AT YOUR SERVICE>>>>>>>>>>>>
Why buy bumper from us? At BumperPlus, the customer
is always right and we mean it! We are small and we need
our customers. We cannot afford to disappoint them, ever.
Sure with the large supplier you might be able to save a
little money but with us you have yourself a partner and
quality workmanship.
Call us first for all your plastic bumpers and any plastic
repair needs. You will not be disappointed! We Would like
to be your partner in all your plastic bumper cover exchange
needs.
(For DO-IT-YOURSELF instruction on how to repair ABS,
POLYURETHANE, POLYCARBONATE, POLYPROPYLENE,
POLYETHELENE, NYLON, TPO, TEO, TPE, FIBERGLASS,
please contact us for information.)
Please do not use an Adhesion Promoter
Our cover is finished with Hydroflex Waterborne Acrylic
Urethane Primer.
This unique Primer is easy to sand wet or dry.
Sand, using 400 grit wet, followed by 500 - 600 wet.
Squeegee away remaining water and allow to dry.
Dry sand with 300 - 400 grit.
Follow topcoat manufacturer's recommendations for
refinishing plastic.
When sanded wet, allow 30 minutes at 70° F (20° C)
dry time before topcoat application. Use of infrared
light will reduce dry times.
Clean up using water only. Do not use solvents. |
These Bumpers are ready to Prep and
Paint! Professionally Reconditioned
Rubber/Plastic/Polybumper. Finished
with Elasomeric (Flexible) Primer.
Please verify that you have the
correct *Paint Procedures Available
from these fine companies:
- BASF ;
- PPG *
- DUPONT*
- SHERWIN-WILLIAMS *
- MARTIN SENOUR *
- SPIES HECKER *
- AKZO NOBELL COATING INC.*
- ICI AUTOCOLOR *
|
